Meyer Cable Box 8118 Manual do Utilizador descarregar pdf (Página 16)

ADJUSTMENTS

WARNING: SHUT OFF AND LOCK OUT POWER BEFORE CLEANING, ADJUSTING, LUBRICATING OR

SERVICING THIS MACHINE. FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.

Correct tension on the apron chains is when the

apron chain slat is 1/8” to 1/4” off the return slides (three

feet from the front of the box). To tighten chains, tighten

the adjuster bolts at each end of the front sprocket

shafts. Each apron chain has its own sprocket shaft.

Tighten the adjuster bolts at each end of the shaft

equally.

The roller chain drives are tensioned by automatic spring

loaded tension blocks. Periodically eye bolts will need to

be adjusted to maintain proper spring tension. Springs

should be stretched to obtain approximately 1/16” gap

between windings.

8100 Rear Unload --15--

ADJUSTMENT DIAGRAM

BOTH SIDES

Front Shields Removed To Illustrate Service Components.

Do Not Remove This Shield To Perform The Service.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Sem comentários

Meyer Cable Box 8118 Manual do Utilizador Página 16